 |
 |
 |
|
|
|
Quality Products & Sales offers Strainers in Carbon Steel and Stainless Steel as in found in different styles from 1/4" to 60" in size with open area of strainers to cross section area of the pipe from 100% to 300% as standards. Strainers materials range from 22 to 11 gauge depending on hole size. Very small particles can be strained by using a liner or cover on a standard strainer by using thru 10 mesh.
Temporary Cone and Basket Strainers:
These Strainers are fabricated using a rolled flange ring process which is resistance welded to the strainer body. This results in a 100% contact weld. Then, by using a more ductile 16 gauge material, this procedure virtually eliminates the possibility of "Body Break Away" where the strainer body could otherwise break completely out of the strainer support ring if excessive "clogging" should ever occur.Standard Vertical Basket Strainers:
These Strainers are designed to minimize pressure drop by maintaining a minimum of 1.15 ratio of annulus outlet area as compared to outlet nozzle cross section area.Contact the factory for more information.